How do I install the Dantherm Swimming Pool Condensation Dehumidifier using the wall duc (Dantherm Swimming Pool Condensation dehumidifier Instructions)

Answer

manuals.plus

Mar 13, 2025 - 03:21 AM

Installation of the Dantherm CDP 40T-50T-70T Swimming Pool Condensation Dehumidifier using the wall duct is a straightforward process. Here are the steps to follow:

1. Determine the location: Choose a suitable location for the dehumidifier near the swimming pool area. Ensure there is enough space for the unit and easy access for maintenance.

2. Prepare the wall: Mark the position on the wall where the dehumidifier will be installed. Ensure the wall is strong enough to support the weight of the unit.

3. Install the wall duct: Cut a hole in the wall according to the dimensions specified in the manual. Install the wall duct provided with the dehumidifier, ensuring it is properly sealed and secured.

4. Connect the ducting: Connect the ducting to the wall duct and route it to the desired location for the air discharge. Make sure the ducting is properly supported and sealed to avoid air leaks.

5. Mount the dehumidifier: Securely mount the dehumidifier to the wall using the mounting brackets provided. Ensure it is level and stable.

6. Electrical connection: Follow the electrical wiring instructions provided in the manual to connect the dehumidifier to a suitable power supply. It is recommended to consult a qualified electrician for this step.

7. Test and adjust settings: Once the installation is complete, turn on the dehumidifier and test its functionality. Adjust the settings according to your desired humidity levels and pool size, as outlined in the manual.

Please note that the above instructions are a general guideline. It is essential to refer to the specific installation instructions provided in the Dantherm CDP 40T-50T-70T Swimming Pool Condensation Dehumidifier manual for accurate and detailed installation steps.