User Manual Q&AAnswer
Mar 13, 2025 - 03:04 AM
To set the temperature and timer on the HARVIA C150VKK Sauna Control Unit, follow these steps:
1. Make sure the main switch (1) is turned on.
2. Use the weekly timer (2) to pre-set the time for the heater to turn on and off. You can set up to 20 timing programs.
3. Press the [Menu] button to open the settings menu on the weekly timer display.
4. Set the clock time, minutes, hours, and weekday using the [Ok] button.
5. Select a factory-set timing program pattern or empty memory using the [Ok] button.
6. Set the on-timing program (heater on) by setting the hours, minutes, and weekday(s) using the [Ok] button.
7. Set the off-timing program (heater off) by setting the hours, minutes, and weekday(s) using the [Ok] button.
8. Repeat steps 5-7 to set additional timing programs if needed.
9. Press the [Menu] button to exit the settings menu and return to the basic mode.
To manually turn on the heater, press the manual switch (3) once briefly. Each press adds half an hour to the on-time, up to a maximum of twelve hours. To turn off the heater before the programmed time has expired, press and hold the manual switch (3) for two seconds.
You can also set the desired sauna temperature using the temperature regulator (5) on the display screen (4). Turn it clockwise to increase the temperature and anti-clockwise to lower it. The maximum temperature you can set is 110 °C.
Please refer to the HARVIA C150VKK Sauna Control Unit Instruction Manual for more detailed instructions and illustrations.
Add New Comment