User Manual Q&AAnswer
Mar 13, 2025 - 02:21 AM
To connect the iSAVER Power+ 1100 Aquagem Pool Pump to your pool, please follow these steps:
1. Turn off all electrical supplies to the pool pump and unplug it from the main switch or chlorinator.
2. Plug the pool pump into the device's power outlet labeled "PUMP CONNECTION ONLY."
3. Plug the device into the main switch/chlorinator/timer connection where the pump was originally plugged into.
4. Switch on all power.
5. Ensure the chlorinator/timer is active.
6. The device is now ready to operate.
Please refer to the wiring diagram provided in the user guide for the correct connection. It is important to note that only one pump can be connected to the inverter, and no other appliances should be connected to the output.
For further assistance or if you are unsure about the compatibility of your pool pump with the device, it is recommended to contact your supplier or manufacturer before proceeding with the installation.
Add New Comment