Answer

Mar 13, 2025 - 02:00 AM
To adjust the temperature settings on the Lakeland 63715 Embossed Super-Soft Heated Throw, follow these steps:
1. Plug in the control unit and switch it on at the socket.
2. Press the power button on the control unit to turn on the throw.
3. Press the temperature setting button on the control unit. A number relating to the current temperature setting will appear in the indicator panel.
4. The default temperature setting is 1. If you want a higher temperature, press the temperature setting button again to increase the setting. There are 9 levels of heat, ranging from 1 to 9. Each press of the button increases the setting by one unit.
5. If the throw becomes too warm for you, you can adjust the temperature setting back to level 2 or 1 by pressing the temperature setting button.
6. Position 2 and 3 of the throw are intended for heating up only, while position 1 is for continuous operation.
7. Before falling asleep, change the temperature setting to level 1.
8. To switch off the heated throw, press the power button on the control unit. The indicator panel should then show nothing. Remember to switch off and unplug the throw at the socket.
Please refer to the instruction manual for more details and safety precautions.
Add New Comment