User Manual Q&AAnswer
Mar 13, 2025 - 01:21 AM
Sure! Here is a step-by-step guide to help you install the TURBRO ACS-460 Wall Mount Bracket:
1. Unfold the foldable brackets (A) and fix them with the bracket attachment bolt kits (B). Each bracket requires one set of bolts.
2. Make sure the mounting surface is suitable for the foldable brackets (A). Mark the pre-drilled holes on the wall and drill the holes using a 1/2-inch drill bit. It is important to double-check that the bracket is level before drilling any anchor holes.
3. Insert the concrete expansion bolts (C) into the drilled holes and mount the L-shaped foldable brackets (A) on the wall. Use one set of expansion bolts for each bracket.
4. Adjust and place the rubber vibration absorbing pads (E) on the foldable brackets (A). These pads help reduce vibrations and noise.
5. Place your heat pump on the rubber pads. Put the nuts of the condenser attachment bolt kits (D) on the foldable brackets (A). Install and tighten the screws of the condenser attachment bolt kits (D) to secure the heat pump in place.
If you encounter any missing parts or have further questions about the installation process, please contact TURBRO support at support@turbro.com. They will be able to assist you further.
Please note that this answer is based on the information provided in the TURBRO ACS-460 Wall Mount Bracket installation guide.
Add New Comment