User Manual Q&AAnswer
Mar 13, 2025 - 01:08 AM
To install the Mondawe IF-1330TCL Electric Fireplace, follow these steps:
1. Select a suitable location for the fireplace that is not susceptible to moisture and is away from drapes, furniture, and high-traffic areas.
2. Measure the minimum clearance to combustibles, ensuring that there is no combustible material within the specified distance from the glass front, sides, top, bottom, and back of the fireplace.
3. If you are doing a recessed installation, open a hole in the drywall according to the dimensions provided in the manual for your specific model.
4. Fix the four wall anchors in each side of the fireplace box according to the dimensions shown in the manual.
5. Take off the two screws on both sides of the fireplace and have two people carefully remove the glass panel from the fireplace box.
6. Move the fireplace box to the wall hole or fireplace mantel and secure it using the provided screws.
7. If the appliance is fully recessed into the wall, use the four screws provided to lock the appliance into the wall with the existing two side flanges.
8. Install the media (logset or crystal embers) and re-install the glass front.
9. If you are doing a wall-mounted installation, select a location at least 36 inches away from combustible materials and have two people hold the appliance against the wall to determine the final location.
10. Mount the bracket(s) onto the wall using the supplied screws, ensuring that the hooks are facing upward and the bracket is level.
11. Lift the appliance and insert the two hooks on the bracket into the two slots on the back of the appliance. Use the original screws to fasten the wall bracket.
12. Check the appliance for stability and ensure that the bracket is securely attached to the wall.
13. Place the front panel and lock the appliance into place.
Please note that these are general installation instructions. It is important to refer to the specific instructions provided in the Mondawe IF-1330TCL Electric Fireplace Instruction Manual for your model to ensure proper installation.
Add New Comment