User Manual Q&AAnswer
Mar 13, 2025 - 12:35 AM
To install the HOME DECORATORS COLLECTION GBBA019 CONISTON 60 in Acrylic Freestanding bathtub, follow these steps:
1. Unpack and inspect the bathtub for any damage. If there is any damage, return the bathtub to the carton until you are ready to install.
2. Install the bathtub on a level and adequately supported floor.
3. Before installation, ensure proper access to the final plumbing connections.
4. Use the floor tracing template provided in the manual to trace the proper position of your supply pipes, drain, and P-Trap rough-in. Place the bathtub in the desired position on the floor and manually locate the proper position for your plumbing. Trace the outline on the floor.
5. Level the bathtub using the adjustable feet. Remove the bathtub and put it on a throw rug to prevent damages.
6. If desired, install the faucets on the bathtub by drilling holes in the acrylic at the desired location. Use masking tape to prevent chipping. Follow the faucet manufacturer's instructions for installation.
7. Connect the faucet supply lines with hot and cold-water supply and check for leaks.
8. Choose one of the following installation options:
a) Option #1: Using OVE FLEX-H2
- xxxx the OVE FLEX-H2 flexible pipe to the preinstalled bathtub drain outlet using Teflon tape and/or thread sealant.
- Connect the flexible pipe to your existing floor drain using PVC pipe sealant.
b) Option #2: Using the OVE FLEX-P (Flexible P-Trap)
- xxxx the OVE FLEX-P flexible P-Trap to the preinstalled bathtub drain outlet using Teflon tape and/or thread sealant.
- Connect the P-Trap to the Flexible Tube as shown in the illustration.
- Connect the Flexible Tube to your existing floor drain using PVC pipe sealant.
c) Option #3: Using regular PVC piping
- Apply Teflon tape and/or thread sealant to the pre-installed bathtub drain.
- xxxx the provided 1-1/2 NPSM to SCH40 Pipe Adapter to the drain.
- Cut a 1-1/2 PVC Extension Tube to the desired length and connect it to the Adapter using PVC pipe sealant.
- Alternatively, use custom fittings to connect the bathtub drain to the existing waste pipe, following local codes and best plumbing practices.
- Connect the PVC tubing to the existing waste drain pipe on the floor using PVC pipe sealant.
9. Test for leaks by filling up the tub and letting it drain. Check all plumbing connections for leaks.
10. Fix the bathtub to the floor by applying a strong Tub & Tile Adhesive under each edge of the tub that will be in contact with the floor, including the rim, lateral bars, and feet.
11. For a professional finish, apply a bead of silicone around the base of the bathtub.
12. Let the adhesive and silicone dry for 24 hours before using the bathtub.
Please note that it is recommended to have at least two people for the installation process, and improper installation may void the warranty and potentially cause water damage. If you have any further questions or need assistance, you can contact the customer service of .
Add New Comment