How do I wire the AFX Ceiling Mount Pendant for dimming? (AFX Ceiling Mount Pendant Instruction Manual)

Answer

manuals.plus

Mar 12, 2025 - 03:47 AM


To wire the AFX ELIP01L30UDxx Ceiling Mount Pendant for dimming, follow these steps:

1. Make sure the power is off at the fuse or circuit breaker box before starting the wiring process.

2. Identify the type of dimming you will be using: TRIAC or 0-10V dimming.

3. For TRIAC dimming:
   - Connect the white wire from the fixture to the white (N) wire from the dimming source, following the dimmer's wiring instructions.
   - Connect the black wire from the fixture to the black (L) wire from the dimmer supply power source, following the dimmer's wiring instructions.
   - Cap off the gray (or pink) and purple wires individually to prevent shorting.

4. For 0-10V dimming:
   - Connect the gray (or pink) wire from the fixture to the dimmer source's gray wire.
   - Connect the purple wire from the fixture to the dimmer source's purple wire.
   - Connect the white wire from the fixture to the white (N) wire from the dimming source, following the dimmer's wiring instructions.
   - Connect the black wire from the fixture to the black (L) wire from the dimmer supply power source, following the dimmer's wiring instructions.

5. Ensure that the wire connections are secure by pulling on each wire lead. Make sure no bare wires are exposed outside of the wire connectors. Neatly tuck all connections into the junction box.

Please note that it is always recommended to consult a qualified electrician for proper installation and to ensure compliance with local electrical codes.