User Manual Q&AAnswer
Mar 12, 2025 - 03:45 AM
To pair the Shopper Cab-PC-08366 Smart Door Lock with the S+ Smart APP, follow these steps:
1. Download the S+ Smart APP from the APP store or Google Play.
2. Register an account on the S+ Smart APP using your email.
3. Enter the verification code sent to your email and create a password.
4. Open the S+ Smart APP and click on the "+" icon on the top right corner of the main page or "Add Device" in the center.
5. Choose "Lock" and swipe right to the "Auto Scan" page.
6. Make sure the Bluetooth on your phone is turned on and your Wi-Fi is connected to a 2.4GHz network.
7. Press and hold the lock's Set button for 10 seconds until you hear a long beep after several short beeps. This will put the lock into "Pairing Mode".
8. The lock will appear on the "Auto Scan" page of the S+ Smart APP.
9. Enter your Wi-Fi network password in the app.
10. Click "Next" and wait for the lock to connect to the Wi-Fi network.
11. Once the lock is successfully connected, disconnect the lock cable, uninstall the batteries, and proceed to the lock installation process.
Note: It is important to pair the lock with the app before installation. If you haven't done so, please refer to "Pair lock with APP" section in the user manual for detailed instructions.
Add New Comment