Answer

Mar 12, 2025 - 03:33 AM
To install the ARPELLA BFRM2436 Framed Rectangular Bathroom Vanity Mirror, please follow these steps:
1. Before installation, make sure to keep the plastic corner protectors on until the installation is fully completed.
2. Measure the distance A of the bracket and mark the positions on the wall where you will drill holes using a suitable tool.
3. Insert the wall plugs into the marked positions on the wall.
4. Fasten the supplied screws into the wall plugs.
5. Hang the mirror directly on the bracket.
6. Once the mirror is hung on the bracket, peel off any protective film that may be present.
7. It is recommended to clean the mirror with a soft, non-abrasive cloth. Do not use cleaning agents or abrasive materials on any type of finished surface.
Please refer to the ARPELLA BFRM2436 Framed Rectangular Bathroom Vanity Mirror Instruction Manual for more detailed instructions and illustrations.
Add New Comment