User Manual Q&AAnswer
Mar 12, 2025 - 03:32 AM
To pair the ifi GOPOD Tws Dac Amp with your device, follow these steps:
1. Make sure the GOPOD Tws Dac Amp is turned on and in pairing mode. The LED on the device should be flashing blue and red.
2. On your device, go to the Bluetooth settings and make sure Bluetooth is enabled.
3. Look for the GOPOD Tws Dac Amp in the list of available devices and select it to initiate the pairing process.
4. Once connected, the LED on the GOPOD Tws Dac Amp will turn solid blue.
Note: If you have trouble pairing, you can try resetting the device by pressing and holding the touch control area for 15 seconds until the LED flashes blue and green. Then repeat the pairing process.
For more detailed instructions and troubleshooting tips, please refer to the user manual provided with the product.
Add New Comment