Answer

Mar 12, 2025 - 03:15 AM
To install the STAHL CMP-20PX2K Cable Gland With Compound, please follow the instructions provided in the manual. Here is a step-by-step guide:
1. Ensure that the cable gland is suitable for your specific application and cable type. The CMP-20PX2K is designed for all types of armored cables, including SWA, braid- and tape-type steel, and aluminum armor.
2. Prepare the cable by removing any outer sheath and exposing the armor and inner cores.
3. Select the appropriate sealing material for your application. The CMP-20PX2K uses SOLO LSF sealing material, which provides excellent sealing properties.
4. Insert the cable through the cable gland, ensuring that the armor is properly aligned with the multi-functional holder.
5. Tighten the gland nut to secure the cable in place. Use the specified torque value provided in the manual to ensure proper installation.
6. Apply the compound seal to the cable gland. The compound seal provides explosion-protected sealing and flood protection.
7. Ensure that all seals are properly installed and tightened to prevent any ingress of moisture or dust.
8. Verify that the cable gland is properly installed by checking the IP rating. The CMP-20PX2K has an IP66 rating, which means it provides protection against dust and powerful water jets.
Please refer to the manual for detailed installation instructions and any additional information specific to your application.
Add New Comment