User Manual Q&AAnswer
Mar 12, 2025 - 03:13 AM
To connect the Niko 550-20102 Home Control Touchscreen to your Niko Home Control installation, you will need to follow these steps:
1. Mount the touchscreen onto the wall using a standard flush-mounting box with a depth of at least 40 mm.
2. Connect the touchscreen with one twisted pair cable (UTP, FTP, or STP) to the Power over Ethernet power supply (PoE), which is available separately. Alternatively, you can also place a separate 24V DC power supply in the cabinet.
3. Both the touchscreen and the connected controller have an RJ45 jack. Mount RJ45 plugs onto the cable to be able to connect one end of the cable to the controller and the other end to the touchscreen.
4. The touchscreen can be supplied with power using Power over Ethernet (PoE) via the same twisted pair cable. For this, you will need the Niko PoE power supply (550-00502). Alternatively, you can provide a separate power supply cable, which you connect to a separate 24 Vdc power supply module in the electrical cabinet. In that case, you will need a 24 V power supply cable such as an SVV, JYSTY, TPVF, or UTP cable in addition to the twisted pair cable.
5. Once the physical connections are made, the touchscreen will be ready to use. It offers a user-friendly interface to operate all functions within your Niko Home Control installation.
Please refer to the Niko 550-20102 Home Control Touchscreen Owner's Manual for more detailed instructions and illustrations on the installation process.
Add New Comment