User Manual Q&AAnswer
Mar 12, 2025 - 02:51 AM
The FISHER PAYKEL DE7060P2 Vented Dryer offers multiple ways to install and vent. Here's how you can do it:
1. Installation:
- Ensure that the dryer is placed on a solid, level surface.
- Leave a minimum of 20mm clearance on each side and 50mm at the rear for proper ventilation.
- Use the included wall mounting kit if you wish to mount the dryer on the wall. Follow the instructions provided in the user guide for wall mounting.
2. Venting:
- This dryer allows for front or rear venting, depending on your preference and the layout of your laundry area.
- To vent from the rear, remove the rear vent grille by unscrewing the screws and attach the venting duct to the outlet.
- To vent from the front, remove the front grille by unscrewing the screws and attach the venting duct to the outlet.
- Ensure that the venting duct is properly connected and secured to avoid any leaks or obstructions.
Please refer to the user guide for detailed instructions and diagrams on installation and venting. If you have any specific concerns or questions, it is recommended to contact Fisher & Paykel's Customer Care Centre for further assistance.
Add New Comment