User Manual Q&AAnswer
Mar 12, 2025 - 02:46 AM
To install the FISHER PAYKEL TKOR304X1 Rear Trim Kit for Gas Freestanding Range, please follow the steps below:
1. Ensure that the gas range is turned off and disconnected from the power source before starting the installation process.
2. Remove any existing rear trim or panel from the gas range.
3. Position the rear trim kit against the back of the gas range, aligning it with the sides and top.
4. Use a screwdriver or a drill to secure the rear trim kit in place. Refer to the user manual for the specific xxxx size and placement.
5. Once the rear trim kit is securely attached, check for any gaps or misalignments. Adjust the trim if necessary to ensure a proper fit.
6. After installation, clean the rear trim kit with a mild detergent and a soft cloth to maintain its appearance.
Please note that these instructions are a general guideline, and it is recommended to refer to the user guide provided with the FISHER PAYKEL TKOR304X1 Rear Trim Kit for Gas Freestanding Range for detailed installation instructions specific to your model.
Add New Comment