User Manual Q&AAnswer
Mar 12, 2025 - 02:45 AM
To install the FISHER PAYKEL RD3684AU Door Panel for Integrated Ice and Water Refrigerator Freezer, please follow the steps below:
1. Ensure that the refrigerator freezer is turned off and unplugged before starting the installation process.
2. Remove any existing door panels by unscrewing the screws or clips holding them in place.
3. Align the new door panel with the front of the refrigerator freezer. Make sure it is centered and level.
4. Attach the door panel to the refrigerator freezer using the provided screws or clips. Refer to the user manual for the specific instructions on how to attach the door panel for your model.
5. Once the door panel is securely attached, check for any gaps or misalignment. Adjust as necessary.
6. If desired, install a handle option of your choice. Follow the instructions provided with the handle for proper installation.
7. If desired, install a toe kick accessory to complete the look. Refer to the user manual for instructions on how to install the toe kick accessory.
8. Once the installation is complete, plug in the refrigerator freezer and turn it on.
Please note that the above instructions are general guidelines. For detailed and model-specific instructions, it is recommended to refer to the user guide provided with the FISHER PAYKEL RD3684AU Door Panel or contact Fisher & Paykel's Customer Care Centre for assistance.
Add New Comment