Answer

Mar 11, 2025 - 04:38 AM
To manually activate the WSM-200, you can press the on/off button on the door of the enclosure. This button is accessible from the outside of the panel. However, during initial setup, it is recommended to set up the internal timer with the desired number of hours for the timer to function when triggered by the on/off button. The timer can be set from 1 to 99 hours, with the default setting being 10 hours. It is not recommended to set the timer for less than 5 hours for proper snow melting results. To change the timer settings, you must first disconnect power to the entire unit, then make the desired changes, and finally turn the power back on. This power-cycle reset is necessary for the timer to recognize the new settings. The manual operation of the system can serve as an override to the WiFi activation, allowing you to manually activate the system without interrupting its regular operation using the WiFi signal and the app's parameters. Remember to turn off the breaker before adjusting the timer settings.
For more detailed instructions and information, please refer to the Warmup WSM-200 Snow Melting Cable Panel Instruction Manual.
Add New Comment