User Manual Q&AAnswer
Mar 11, 2025 - 04:37 AM
To install the CONDUCTIX wampfler 040610 Spring Driven Reel, follow these steps:
1. Choose a location that meets the specified and valid regulations for electrical installations.
2. Refer to the installation drawings and use the suitable expansion pins or screws, as well as the existing drilled holes on the bracket, to install the cable reel.
3. Electrical connection should only be done by a qualified electrician.
4. Use a suitable cable size and follow the instructions on the label for connecting the conductors (green/yellow for earth and N/blue for neutral wire).
5. When connecting the feeding cable with the cable connection bridge, ensure that there is sufficient draft resistance to prevent damage to the cable.
6. Additional information and connection drawings suitable for each cable reel will be provided separately.
Please note that these instructions are a summary and it is important to refer to the full instruction manual for complete and accurate installation guidelines.
Add New Comment