Answer

Mar 11, 2025 - 04:18 AM
To install the Alphacool Eisbaer Aurora AIO CPU Water Cooler on an LGA 115x socket, follow these steps:
1. Select the appropriate bracket and plug it together.
2. Remove the protective film from the backplate.
3. Fix the backplate to the back of the motherboard with the tape.
4. Insert the LGA 115x screws through the pressure springs, washers, and the holder.
5. Place the cooler on the CPU, aligning the screws with the mounting holes on the socket.
6. Hand-tighten the screws until the cooler is securely mounted on the socket. Do not use tools.
7. Plug the 3-pin connector from the pump into a free fan connector on your motherboard.
For more detailed instructions and illustrations, please refer to the Alphacool Eisbaer Aurora AIO CPU Water Cooler Instruction Manual.
Add New Comment