User Manual Q&AAnswer
Mar 11, 2025 - 04:12 AM
To connect the TESLA TechToy Smart Bulb to the "Tesla Smart" app, please follow these steps:
1. Download and install the "Tesla Smart" app from the Apple App Store or Google Play on your device. Make sure your device meets the system requirements (iOS 8.0 or newer for Apple devices, Android 4.4 or newer for Android devices).
2. Create a new account or log in to your existing account within the app.
3. Ensure that you have a properly configured Tesla Smart ZigBee Hub.
4. xxxx the TESLA TechToy Smart Bulb into the fitting and turn on the power. The bulb should enter pairing mode (when switched on, the bulb will cycle through its colors or flash briefly).
5. Open the "Tesla Smart ZigBee Hub" within the app and click on "Add a sub-device".
6. Confirm the pairing and wait for the configuration to complete.
7. Once connected, you can configure the system and share it with family and friends. You can also use voice assistants such as Amazon Alexa or Google Assistant to control the light.
Please note that the above instructions are based on the information provided in the user manual. If you encounter any difficulties during the setup process, it is recommended to refer to the user manual or contact the manufacturer's customer support for further assistance.
Add New Comment