User Manual Q&AAnswer
Mar 11, 2025 - 04:09 AM
To add an All-in-One Sensor to your Arlo Home Security System, follow these steps:
1. Open the Arlo Secure App on your mobile device.
2. Tap on "Add Device" or the "+" symbol if you have other devices.
3. Follow the setup instructions provided in the app for your All-in-One Sensor.
Note: The sensor is designed for indoor use only. The Arlo Secure App will guide you on how to separate and reattach the front module from the back housing. Only attach the sensor adhesive if instructed to do so by the app. If you are using the sensor to detect water leaks, the adhesive is not necessary.
For further assistance, you can visit www.arlo.com/support, where you will find helpful resources such as how-to videos, troubleshooting tips, and additional support materials.
Please refer to the user guide provided with your All-in-One Sensor for more detailed instructions and information.
Add New Comment