User Manual Q&AAnswer
Mar 11, 2025 - 03:44 AM
To connect the to your network, follow these steps:
1. Locate the Q-SYS LAN ports on the rear panel of the processor. There are four LAN ports labeled LAN A, LAN B, AUX A, and AUX B.
2. Choose the LAN port that you want to use for network connectivity. LAN A and LAN B are the primary LAN ports, while AUX A and AUX B are auxiliary LAN ports.
3. Connect an Ethernet cable from your network switch or router to the selected LAN port on the Q-SYS Core 610 Processor.
4. Ensure that the other end of the Ethernet cable is connected to an available port on your network switch or router.
5. Once the Ethernet cable is connected, the Q-SYS Core 610 Processor will automatically obtain an IP address from your network's DHCP server.
6. To access and configure the Q-SYS Core 610 Processor, you can use Q-SYS Designer Software. Install the software on a computer connected to the same network as the processor.
7. Launch Q-SYS Designer Software and follow the instructions provided in the software's user guide to discover and connect to the Q-SYS Core 610 Processor.
Note: It is recommended to refer to the Q-SYS Core 610 Processor User Guide for detailed instructions and troubleshooting information related to network connectivity and configuration.
Add New Comment