User Manual Q&AAnswer
Mar 11, 2025 - 03:25 AM
To install the window kit for the Danby DPA060B1WDB Portable AC, follow these steps:
1. Measure the window opening where the window kit will be installed.
2. Assemble the window sliders to fit the window. If the window opening is smaller than a single slider, use the slider with the hole and cut it to the correct length. Do not cut the end with the hole, as it is necessary for attaching the exhaust hose adapter.
3. Cut the adhesive foam seals to the correct length for the window and attach them to the window sash and frame.
4. Connect the window slider adapter to the window slider by pressing it into the hole until it clicks into place.
5. Attach the exhaust hose to the window slider adapter by pressing it into the adapter until it clicks into place.
6. Install the slider kit and hose assembly in the window and close the window to hold it in place.
7. Attach the air outlet adapter to the back of the appliance by sliding it down into the channel around the air outlet.
8. Attach the hose to the air outlet adapter on the back of the appliance by pressing it into the adapter until it clicks into place.
9. Cut the non-adhesive foam seal to match the width of the window and insert it between the glass and the window frame to prevent air and insects from entering the room.
10. Install the security bracket in the window frame using the provided screws.
Note: Do not overextend or bend the hose, as this can impede airflow.
Add New Comment