How do I install the Rhino RA2PR-FL KammBar Pro System? (RHINO KammBar Pro System Instructions Manual)

Answer

manuals.plus

Mar 11, 2025 - 03:24 AM


To install the Rhino RA2PR-FL KammBar Pro System, please follow the installation instructions provided by Rhino Products Ltd. Here is a general guide on how to install the system:

1. Ensure that you have all the necessary components, including the KammBar Pro, KammBar Fleet, and Fitting Kit.

2. Start by positioning the KammBar Pro on the roof of your vehicle. Make sure it is centered and aligned properly.

3. Use the Fitting Kit to attach the KammBar Pro securely to the roof. The Fitting Kit should include brackets, bolts, and other necessary hardware. Refer to the specific instructions provided in the Fitting Kit for the correct installation process.

4. Once the KammBar Pro is securely installed, repeat the same process for the KammBar Fleet if you have it.

5. Ensure that all bolts and brackets are tightened properly to prevent any movement or instability during use.

6. It is important to note the weight limits for each component. The KammBar Pro has a maximum weight capacity of 75kg/165lbs, while the KammBar Fleet has a maximum weight capacity of 50kg/110lbs. Do not exceed these weight limits to ensure safe usage.

7. After installation, double-check all connections and make sure everything is secure before using the system.

For more detailed and specific instructions, please refer to the installation manual provided by Rhino Products Ltd. You can find the manual on their website at rhinoproducts.co.uk or contact their customer support for further assistance.