Answer

Mar 11, 2025 - 03:13 AM
To load the HILTI GX-IE Gas Actuated Insulation Nailer, follow these steps:
1. Remove the gas can compartment cover.
2. Push the gas can (with the metering valve fitted) into the red adapter in the gas can compartment.
3. Close the gas can compartment cover.
4. Check that the contacts on the battery and on the fastening tool are undamaged and free from foreign objects.
5. Fit the battery into the fastening tool and make sure it engages.
6. Once the battery has been fitted, the charge status LEDs will light up for a short time.
Please note that it is important to remove the gas can and battery before leaving the fastening tool unattended, performing maintenance, or transporting or storing the tool. Always refer to the instruction manual for detailed instructions and safety precautions.
Add New Comment