Answer

Mar 11, 2025 - 03:09 AM
To charge the battery of the HILTI NPR 032 IE-A22 Pipe Press Tool, follow these steps:
1. Before charging the battery, make sure that the contacts on the battery and the contacts on the charger are clean and dry.
2. Use an approved charger to charge the battery. Refer to the operating instructions for the charger for specific details.
3. Insert the battery into the charger, ensuring that it is properly aligned and securely seated.
4. Connect the charger to a power source. The charger will start charging the battery.
5. Monitor the charging process using the battery status display on the charger or the LED indicators on the battery itself. The LED indicators will show the state of charge of the battery.
6. Once the battery is fully charged, remove it from the charger.
It is important to use only HILTI-approved battery chargers to charge the batteries and to follow the instructions provided in the operating manual for the charger.
Add New Comment