User Manual Q&AAnswer
Mar 11, 2025 - 02:45 AM
To connect the WPI405 module to your Arduino board, follow these steps:
1. Connect the +3.3V pin of the WPI405 module to the 3.3V pin of your Arduino board.
2. Connect the RST pin of the WPI405 module to pin 9 of your Arduino board.
3. Connect the GND pin of the WPI405 module to the GND pin of your Arduino board.
4. Connect the MISO pin of the WPI405 module to pin 12 of your Arduino board.
5. Connect the MOSI pin of the WPI405 module to pin 11 of your Arduino board.
6. Connect the SCK pin of the WPI405 module to pin 13 of your Arduino board.
7. Connect the NSS (SDA) pin of the WPI405 module to pin 10 of your Arduino board.
Please note that it is important to connect the VCC pin of the WPI405 module to the 3.3V pin on your Arduino board, not the 5V pin. Connecting it to the 5V pin may damage the module.
For a visual representation of the connections, refer to the example drawing provided in the manual.
Remember to double-check all connections before powering on your Arduino board.
Add New Comment