User Manual Q&AAnswer
Mar 11, 2025 - 02:32 AM
To install the INVACARE 1588084 Shut Off xxxx on your Invacare HomeFill Cylinder, please follow these steps:
1. Ensure that the cylinder is empty and the HomeFill system is turned off and disconnected from any power source.
2. Locate the existing shut off xxxx on the cylinder. It is usually located near the top of the cylinder.
3. Remove the existing shut off xxxx by turning it counterclockwise until it comes off.
4. Take the new INVACARE 1588084 Shut Off xxxx and align the threads with the opening on the cylinder.
5. Carefully thread the new shut off xxxx onto the cylinder by turning it clockwise. Make sure it is tightened securely but not over-tightened.
6. Once the shut off xxxx is securely in place, you can proceed with connecting the HomeFill system and using the cylinder as intended.
Please note that these instructions are a general guideline and may vary slightly depending on the specific model of the Invacare HomeFill Cylinder. It is always recommended to consult the official instruction manual provided by Invacare for your specific model for detailed and accurate installation instructions.
Source: https://manuals.plus/invacare/1588084... xxxx -manual
Add New Comment