User Manual Q&AAnswer
Mar 11, 2025 - 02:29 AM
To control the amplitude, offset, frequency, duty cycle, and phase difference of the signal output, follow these steps:
1. Press the corresponding button or use the xxxx to select the parameter you want to adjust (amplitude, offset, frequency, duty cycle, or phase difference).
2. Once the parameter is selected, the LCD display will show the current value of that parameter.
3. Use the xxxx to adjust the value of the parameter. Turning the xxxx clockwise will increase the value, while turning it counterclockwise will decrease the value.
4. Continue adjusting the value until you reach the desired setting.
5. Repeat the above steps for each parameter you want to control.
Please refer to the user manual for more detailed instructions and specific button/ xxxx functions.
Add New Comment