Answer

Mar 11, 2025 - 01:43 AM
Connecting the Fruugo 2 Wires Black Tone Rotatable xxxx Desk Lamp Dimmer Switch to your lamp is a simple process. Here is a step-by-step guide:
1. Ensure that the power is turned off and unplugged from the lamp before starting the installation process.
2. Identify the two wires coming from your lamp. One wire is typically black or brown, and the other wire is usually white or blue.
3. Strip off a small portion of the insulation from the end of each wire, exposing the bare copper.
4. Locate the two wire terminals on the dimmer switch. One terminal is labeled "L" or "Line," and the other is labeled "N" or "Neutral."
5. Insert the stripped end of the black or brown wire into the "L" or "Line" terminal and tighten the xxxx to secure the connection. This wire is the hot wire that carries the power.
6. Insert the stripped end of the white or blue wire into the "N" or "Neutral" terminal and tighten the xxxx to secure the connection. This wire is the neutral wire that completes the circuit.
7. Once the connections are secure, double-check that all screws are tightened and there are no loose wires.
8. Carefully place the dimmer switch back into the lamp housing, ensuring that it fits properly.
9. Turn on the power and test the dimmer switch by rotating the xxxx . You should be able to click it on and off, as well as adjust the brightness level.
Please note that if you are not confident in your electrical skills, it is recommended to consult a professional electrician for assistance with the installation. Always prioritize safety when working with electrical components.
Source: https://manuals.plus/fruugo/2-wires-b... xxxx -desk-lamp-dimmer-switch-220v-manual
Add New Comment