Answer

Mar 11, 2025 - 01:33 AM
To properly clean and prepare the Miele APFD 201 insert for use, follow these steps:
1. Lift the top insert out of the small-part basket and place it next to the insert. Open the lid of the top insert.
2. Ensure that the insert holders and the adjacent compartments of the small-part basket have the same color. Colored tags are provided with the inserts for this purpose.
3. Check if the breathing mask requires manual pre-cleaning. If necessary, carry out pre-cleaning according to the manufacturer's instructions.
4. Dismantle the breathing mask in line with the manufacturer's instructions.
5. Place the small parts in a compartment of the top insert of the small-part basket.
6. Place the inner mask in the compartment in the small-part basket with the curved hollow side facing down. Note the color coding for the small-part basket compartment to place the breathing masks in the same color in the insert.
7. Place the breathing masks on the holders on the APFD 201 insert. Ensure that the color coding for the holder corresponds to that for the compartment in the small-part basket.
8. Arrange the masks in such a way that as little wash water as possible can collect in curved hollow areas to avoid damage.
9. Avoid touching visor panels to prevent scratching. Arrange the masks in a way that the visor panels do not touch.
10. Equip the remaining positions of the insert in the same way.
11. Close the lid on the top insert of the small-part basket and place the top insert on the small-part basket.
12. Lift the insert at the side handles and place it in the load carrier of the machine for reprocessing.
Please refer to the Miele APFD 201 Insert Instruction Manual for more detailed instructions and safety information.
Add New Comment