How do I set up the GARADOR Smart Phone Control Kit and App? (Garador Smart Phone Control Kit App User Guide)

Answer

manuals.plus

Mar 10, 2025 - 04:25 AM

To set up the GARADOR Smart Phone Control Kit and App, follow these steps:

1. Make sure your garage door opener or device is operational and you know your WiFi password.
2. Place the Smart Hub within range of your home WiFi router and connect it to power.
3. Download the Garador App by scanning the QR code provided for your specific device (iOS or Android).
4. Open the app and click on "Get Started".
5. Click on "Setup a new Smart Hub/Opener".
6. Select "Smart Hub" and click "Next".
7. Enable the Hotspot on the Smart Hub by holding down the Hub button for 5 seconds until the LEDs flash and then release. Wait for the button to have a solid purple light and click "Next".
8. Allow access to your location when prompted and click "Next".
9. The hub will now connect to your phone app, press "Join".
10. The button on the hub will flash, press it to continue.
11. You are now connected.
12. Set up the details on your device and click "Next".
13. Complete your personal details.
14. Enter your WiFi network details, select your WiFi network (must be a 2.4GHz network), enter your WiFi password, and press "Next".
15. The app will now connect to your WiFi, which may take several minutes.
16. If your phone reconnects to a different WiFi network than your hub, you may see a message. Make sure your phone is connected to the same network as the hub.
17. Wait for any updates to the WiFi firmware, if applicable.
18. Once the firmware update is complete, click "Next".
19. To link your opener or device to the hub, click "+ Set up a new device".
20. Select "Opener" and press "Next".
21. Make sure your device is powered on and have your registration code or QR card ready. Press "Next".
22. Select the hub you want to connect your opener to (if you have multiple hubs).
23. Scan the QR code provided or enter your registration code manually.
24. If using a QR code, press "OK" to scan it.
25. Wait for the hub to connect to your opener/device.
26. Once connected, press "Next".
27. Give your opener/device a name (e.g., Left Garage) and press "Next".
28. Choose any notifications you want from the app and press "Done".
29. The setup is now complete, and your smart opener is ready to use. Press "Okay" to view your opener dashboard.

If you encounter any issues during the setup process, refer to the for troubleshooting steps or contact GARADOR customer support at 0800 GARADOR (427 236) or visit their website at GARADOR.CO.NZ.