How do I install the KMINA K30011 Bidet Toilette? (KMINA Bidet Toilette Instruction Manual)

Answer

manuals.plus

Mar 10, 2025 - 04:18 AM


To install the KMINA K30011 Bidet Toilette, follow these steps:

1. Close the toilet water stopcock and empty the cistern to ensure no water remains or drips.
2. Unscrew the hose and remove the toilet lid. Place a cloth under the faucet or a bucket to catch any remaining water in the tank.
3.  xxxx  the brass nut (F3 - UK) onto the T-valve (F2 - UK) after passing one end of the PU tube (D) through it. Place the gasket (F1 - UK) on top. Use Teflon tape (E) on the thread of (F2 - UK) before screwing to prevent water leaks.
4. Take the locking nut (C), which is already mounted on the bidet (A), and  xxxx  it onto the other end of the PU tube (D). Use Teflon tape (E) on (C) before screwing to prevent water leaks.
5.  xxxx  the PU tube (D) into both the bidet (A) and the T-valve (F2 - UK).
6.  xxxx  the upper part of the T-shaped valve (F2 - UK) into the tank and the lower part into the hose. Use Teflon tape (E) both at the bottom of (F2 - UK) and at the inlet of the cistern before screwing to prevent water leaks. Place the bidet (A) with its holes (A1) aligned with the holes where the cover is screwed.
7. Place the gaskets (B) on top of the bidet holes (A) and then  xxxx  on the toilet lid.
8. Open the stopcock until the tank is full and follow the instructions for use.

For more detailed instructions and illustrations, please refer to the KMINA K30011 Bidet Toilette Instruction Manual.