User Manual Q&AAnswer
Mar 10, 2025 - 04:14 AM
To disable the Wi-Fi functionality on your MONTIGO XT0081 remote control (RGC3105 transmitter), follow these steps:
1. Partially insert the batteries into the battery holder.
2. Press and hold the Power On/Off button and the O button simultaneously.
3. While keeping the buttons pressed, fully insert the batteries into the battery holder. The screen will display various icons.
4. Each icon can be set (indicated by "Set") or unset (indicated by "Clr").
5. While still holding the Power On/Off button, press the O button to navigate through the icons.
6. Locate the Transmission icon, which should be in the "Clr" state.
7. While still holding the Power On/Off button, press the Up button to set the icon and remove it from the screen.
8. Release the Power On/Off button. The Wi-Fi functionality is now disabled, and the Tx Remote Command is ready to be used.
After disabling the Wi-Fi functionality, you can proceed with the usual syncing steps as outlined in the manual. Press the red SW1 button on the IFC control board and the ON/OFF button on the transmitter simultaneously. You should hear three confirming beeps when pressing the SW1 button on the IFC board, and another three beeps when the pairing is successful.
Please refer to the MONTIGO XT0081 Remote Control User Manual for further details and troubleshooting steps.
Add New Comment