Answer

Mar 10, 2025 - 04:03 AM
To install the cardo Stay in Touch PACKTALK Neo Headset on an open-face helmet, please follow these steps:
1. Remove the padding: Begin by removing the padding from the helmet where you plan to install the headset.
2. Place the microphone: Position the microphone using the included Velcro attachments. Make sure it is placed in a convenient location near your mouth for clear communication.
3. Installation on a narrow rim helmet: If your helmet has a narrow rim, push the clamp of the headset into place on the rim. Ensure it is securely attached.
4. Installation on a wide-rim helmet: For helmets with a wide rim, tuck the wires behind the padding to keep them out of the way. If necessary, you can use booster pads to position the speakers closer to your ears for optimal sound quality.
5. Install the unit: Attach the main unit of the headset to the clamp or mounting system provided. Make sure it is securely fastened.
6. Test and adjust: Put on your helmet and test the headset to ensure it is working properly. Adjust the position of the speakers and microphone if necessary for better comfort and audio quality.
7. Remove the unit: If you need to remove the headset from your helmet, simply press the release mechanism or follow the instructions provided in the manual.
For further assistance or troubleshooting, you can visit the cardo systems support website at cardosystems.com/support or check out their YouTube channel at youtube.com/CardoSystemsGlobal.
Add New Comment