User Manual Q&AAnswer
Mar 10, 2025 - 03:51 AM
To connect the Vari-Lite NEO X15 Lighting Control Console to power, follow these steps:
1. Make sure the console's power switch is set to "Off".
2. Connect the AC input cable to the AC Input connection on the console. Refer to Figure 1 in the manual for the location of the AC Input connection.
3. Connect the other end of the AC input cable to the AC supply source.
4. Turn on the console using the Console On/Off Switch.
Note: It is important to connect the console to the lighting system before it can provide control. Refer to the "Connections" section in the manual for more information on how to make the necessary connections.
Please refer to the Vari-Lite NEO X15 Lighting Control Console User Guide for more detailed instructions and safety warnings.
Add New Comment