User Manual Q&AAnswer
Mar 08, 2025 - 11:39 AM
To assemble the baby express Be Free Wearable Breast Pump, follow these steps:
1. Put the diaphragm on top of the connector.
2. Insert the silicone valve at the bottom of the connector, making sure to note the direction of insertion.
3. Hold the top of the connector and align the ears on the connector with the collection cup. Fit it in, preferably by inserting it upside down for easier insertion.
4. Fit the silicone flange onto the collection cup and ensure it is properly sealed.
5. Sit the pump motor onto the collection cup.
To wear the pump:
1. Put the assembled pump firmly onto your breast, ensuring that the xxxx is aligned in the center. Keep the pump upright at all times.
2. Use the bra extender with your nursing bra to fit the pump. Make sure the pump sits firmly on your breast.
Note: The pump has a memory function and will enter the last working mode when turned on. The bra extender can prevent damaging your bra by overstretching it.
Please refer to the user guide for more detailed instructions and illustrations.
Add New Comment