Answer

Mar 08, 2025 - 09:59 AM
To connect the Yorkville YXL15SP powered subwoofer to your audio system, follow these steps:
1. Locate the input section on the rear panel of the subwoofer. It will have two XLR/1/4-inch combo input jacks labeled "Main IN."
2. Use XLR or 1/4-inch cables to connect the output of your audio source (such as a mixer or amplifier) to the Main IN jacks on the subwoofer. Make sure to match the left and right channels correctly.
3. If you have additional subwoofers or speakers that you want to connect, use the XLR male jacks labeled "LINK" on the rear panel. Connect the output of the YXL15SP subwoofer to the input of the next subwoofer or speaker using XLR cables.
4. Once all the connections are made, turn on your audio system and the YXL15SP subwoofer. The power switch is located at the bottom of the rear panel.
5. Adjust the subwoofer level using the Sub Level control on the front panel. This allows you to set the desired volume level of the subwoofer in relation to the rest of your audio system.
6. The also has different performance modes (Punch, Smooth, and Deep) that can be selected using the Mode switch on the front panel. Experiment with these modes to find the one that best suits your audio preferences.
Note: It is important to read and understand the complete owner's manual for the Yorkville YXL15SP powered subwoofer before operating it. The manual provides additional information on safety precautions, maintenance, and troubleshooting.
Add New Comment