User Manual Q&AAnswer
Mar 08, 2025 - 09:57 AM
To fit the PYRAMID BMW F900 R 2020 Extenda Fenda and Hugger Extension using method A, please follow these steps:
1. Remove the mudguard from the bike and clean the inside.
2. Attach a few Stick-Fit pads to the Extenda Fenda/Hugger Extension in the designated area shown in the manual to create a gasket.
3. Peel the backing paper from the Stick-Fit pads.
4. Fit the Extenda Fenda/Hugger Extension to the mudguard and check for alignment before proceeding to the next step.
5. Use masking tape to mark equally spaced drilling points on the Extenda Fenda/Hugger Extension and mudguard.
6. Drill through the marked points on the Extenda Fenda/Hugger Extension and mudguard.
7. Fit the provided Push-Rivets into the drilled holes.
8. Re-fit the mudguard to the bike.
Please note that this method does not require the use of the adhesion wipe provided.
For more detailed instructions and visual guidance, you can visit the website 'youlube.com/pyromidploslix' for a video tutorial on fitting a Slick-Fit Extenda Fenda/Hugger Extension.
If you have any further questions or need assistance, you can contact PYRAMID at support@pyramid-plastics.co.uk or visit their website www.pyramid-plastics.co.uk.
Add New Comment