User Manual Q&AAnswer
Mar 08, 2025 - 09:38 AM
To descale the AENO AEK0003 electric kettle, follow these steps:
1. Prepare a descaling solution using either 8% vinegar or citric acid. Mix 30 grams of citric acid with 0.5 liters of water.
2. Pour the descaling solution into the kettle, filling it up to about half of its capacity.
3. Allow the solution to sit in the kettle for approximately 2 hours without boiling.
4. After 2 hours, pour out the descaling solution from the kettle.
5. Boil water in the kettle 4-5 times to rinse out any remaining descaling solution.
6. Once the rinsing process is complete, the kettle is ready for use again.
Note: The frequency of descaling depends on the hardness of the water in your area. If the water is hard or very hard, it is recommended to descale the kettle once a month when using it 3-5 times a day. For soft or medium-hard water, descaling can be done once every 2-3 months.
Please refer to the "Maintenance" section of the user manual for more detailed instructions on descaling and cleaning the AENO AEK0003 electric kettle.
Add New Comment