User Manual Q&AAnswer
Mar 08, 2025 - 09:31 AM
To install the ANSLUT 018969 LED Industrial Luminaire, please follow these steps:
1. Always disconnect the power supply before installation.
2. xxxx in the eye xxxx provided and tighten it securely.
3. Connect the wires as follows:
- Black wire: Live wire
- White wire: Neutral wire
- Green-yellow wire: Earth wire
4. Check that the grommet is tight.
5. Fasten a hook to the ceiling.
6. Hang up the light on the hook and secure the opening of the hook.
For more detailed instructions and illustrations, please refer to the instruction manual provided with the product.
Note: It is important to always follow safety instructions and consult an authorized electrician if you have any doubts about the electrical installation.
Add New Comment