Answer

Mar 08, 2025 - 09:29 AM
To remove the cartridge from your Moen unit using the Everbilt 69943 Hot-Cold Cartridge, please follow these steps:
1. Turn off the water supply to your unit and relieve any water pressure by opening a faucet connected to the same water line.
2. Locate the handle button on your unit and remove it by gently prying it off with a screwdriver.
3. Once the handle button is removed, you will see a xxxx underneath. Use a screwdriver to remove this xxxx .
4. Look for a retainer clip on the top of the faucet body. Remove this clip using a screwdriver or pliers.
5. Reattach the handle temporarily and gently pull the cartridge out of the faucet body. If the cartridge is difficult to remove, you can use the Moen cartridge removal tool (Part # 1006964489) for assistance.
6. Once the old cartridge is removed, take the new Everbilt 69943 Hot-Cold Cartridge and use the plastic alignment tool included to install it properly.
7. Reinstall the retainer clip, handle, and button in the reverse order of removal.
8. Turn on the water supply and check for any leaks.
Please note that the handle images mentioned in the manual are for identification purposes only and are not included with the replacement cartridge.
Add New Comment