User Manual Q&AAnswer
Mar 08, 2025 - 09:27 AM
To install the HARBOR FREIGHT 56521 Color Changing LED String Lights, please follow these steps:
1. Read the entire IMPORTANT SAFETY INFORMATION section in the manual before starting the installation.
2. Make sure the power cord/controller is not plugged into an AC outlet until the installation is complete.
3. If using a guide wire, attach the ring at the back of every bulb holder to the guide wire using an S-hook or nylon tie (sold separately).
4. If not using a guide wire, connect the string lights securely to a structure at the beginning and end of each string light using xxxx hooks (sold separately).
5. Connect the string lights together by connecting the female end connector of one string to the male end connector of another string. Align the grooves inside the connectors and tighten securely.
6. At the end of the last string, attach the end cap and tighten securely.
7. Connect the power cord to the controller and then attach them to the string lights.
8. Once the installation is complete, plug the power cord/controller into a 120 VAC outlet.
9. Use the remote control to turn the lights on/off and select color and mode changes.
Please refer to the manual for additional safety instructions and detailed illustrations.
Add New Comment