User Manual Q&AAnswer
Mar 08, 2025 - 09:10 AM
To install the Versonel VSL95 Night Watcher Robotic Security Lighting, follow these steps:
1. Switch off the power before installing the fixture to ensure safety.
2. Select the installation area and mount the fixture between 6.6 ft/2 meters and 10 ft/3 meters above the ground.
3. Feed the fixture's black and white wires through the Universal mounting bracket and the EVA gasket before connecting them inside the junction box.
4. Use wire nuts to connect the wires inside the junction box.
5. Align the light fixture with the base cover and ensure the backplate seal is in place. Tighten the light fixture to the base cover using the provided screws and cover the xxxx heads with the decorative xxxx covers.
Add New Comment