User Manual Q&AAnswer
Mar 08, 2025 - 08:47 AM
To program the Hama 223582 Radio Controlled Socket to work with your remote control, follow these steps:
1. Plug the radio-controlled socket into an outdoor earthed socket.
2. Press and hold the "LEARN" button on the radio-controlled socket for approximately 3 seconds until the LED starts to flash.
3. Select the desired channel on your remote control by pressing the corresponding "ON" button.
4. The LED on the radio-controlled socket will stop blinking when it has successfully learned the frequency.
5. If the learning process is unsuccessful, the radio-controlled socket will exit learn mode after 15 seconds. In this case, repeat the process. Note that you can assign a channel multiple times, allowing multiple radio-controlled sockets to respond to the same remote control button.
6. To delete a programmed channel, press the "LEARN" button until the LED flashes, then press the "OFF" button for the channel you want to remove its programming.
For more detailed instructions and information, please refer to the Hama 223582 Radio Controlled Socket Instruction Manual provided with the product.
Add New Comment