How do I install the Paul Neuhaus 9142 LED Pendant Light? (Paul Neuhaus LED Pendant Light Instruction Manual)

Answer

manuals.plus

Mar 08, 2025 - 07:38 AM


Installation of the Paul Neuhaus 9142 LED Pendant Light is relatively straightforward. Please follow the steps below:

1. Ensure that the power supply is turned off before starting the installation process.

2. Carefully unpack the pendant light and check that all the necessary components are included.

3. Attach the mounting plate to the ceiling using screws and wall plugs appropriate for your ceiling type. Make sure the mounting plate is securely fixed.

4. Connect the electrical wires from the ceiling to the corresponding wires of the pendant light. The wires should be connected according to their colors (e.g., black to black, white to white, and green/yellow to green/yellow).

5. Once the wires are securely connected, carefully lift the pendant light and align it with the mounting plate. Gently push the pendant light upward until it is firmly attached to the mounting plate.

6. If your pendant light has a dimmer function, you can adjust the brightness level by pressing and holding the dimmer button. The light will start to dim, and you can release the button when the desired brightness is attained. The pendant light will save the brightness level for future use.

7. Finally, turn on the power supply and test the pendant light to ensure it is functioning correctly.

Please note that these instructions are a general guide. For specific details and illustrations, please refer to the Paul Neuhaus 9142 LED Pendant Light Instruction Manual provided with the product.