Answer

Mar 08, 2025 - 07:35 AM
To assign the remote control to the Paul Neuhaus 12101 Ceiling Light, please follow these steps:
1. Make sure the light is turned on and functioning properly.
2. Take the remote control and remove the battery cover.
3. Insert the batteries into the remote control, making sure to match the polarity (+/-) correctly.
4. Point the remote control towards the light and press and hold the "Assign" button on the remote control for about 5 seconds.
5. During this time, the light will blink or change its brightness to indicate that it is ready to be assigned.
6. Release the "Assign" button on the remote control.
7. Within 10 seconds, press any button on the remote control to assign it to the light.
8. The light will blink or change its brightness again to confirm that the remote control has been successfully assigned.
9. Test the remote control by pressing various buttons to control the light's functions such as turning it on/off, adjusting brightness, or changing color (if applicable).
If you encounter any issues during the assignment process, please refer to the Paul Neuhaus 12101 Ceiling Light Instruction Manual for further troubleshooting steps or contact SellTec GmbH's customer service at +49(0)2922 9721 9290 or Kundenservice@neuhaus-group.de for assistance.
Add New Comment