How do I assign the remote control to the Paul Neuhaus 12100 Ceiling Light? (Paul Neuhaus Ceiling Light Instruction Manual)

Answer

manuals.plus

Mar 08, 2025 - 07:33 AM


To assign the remote control to the Paul Neuhaus 12100 Ceiling Light, please follow the instructions provided in the manual:

1. Ensure that the light is turned on and functioning properly.
2. Take the remote control and locate the "Assign" or "Pairing" button. This button is usually found on the back of the remote control.
3. Press and hold the "Assign" or "Pairing" button on the remote control for a few seconds until the LED indicator on the remote control starts flashing.
4. While the LED indicator is flashing, press any button on the remote control to assign it to the light. The light will respond by flashing or changing its brightness/color.
5. Once the remote control is successfully assigned to the light, the LED indicator on the remote control will stop flashing.
6. Test the remote control by using its various functions to control the light, such as turning it on/off, adjusting the brightness, or changing the color (if applicable).

If you encounter any difficulties during the assignment process or if the remote control does not work as expected, please contact Selltec GmbH, the manufacturer of the Paul Neuhaus 12100 Ceiling Light, for further assistance. You can reach their customer service at +49(0)2922 9721 9290 or via email at Kundenservice@neuhaus-group.de. Additionally, you can visit their website at www.neuhaus-group.de for more information.