User Manual Q&AAnswer
Mar 08, 2025 - 07:25 AM
To install the vanity top and backsplash, follow these steps:
1. Remove the stone top and the packaging material under the stone top.
2. Apply a thin bead of silicone compound (not included) to the top of the vanity base.
3. Align the back of the vanity base and place the stone top on the vanity base.
4. Mark the wall for vanity placement and note the location of the water supply lines and drain on the back panel of the vanity.
5. Move the vanity into the proper place against the wall.
6. Install the faucet, drain, and supply lines (not included) to the vanity top according to the instructions supplied with those items.
7. Adjust the floor levelers at the bottom of the vanity if necessary to correct tilting and/or level doors.
8. To mount the backsplash to the wall, apply a thin bead of silicone compound to the unpolished back side and bottom of the backsplash.
9. Position the backsplash onto the vanity top and against the wall. Clean any excess silicone compound before allowing it to dry.
Please refer to the user manual for more detailed instructions and illustrations.
Add New Comment