User Manual Q&AAnswer
Mar 08, 2025 - 06:42 AM
To connect the FERVE PRIMA F-806 Battery Charger to your car battery, please follow these steps:
1. Before connecting or disconnecting the clamps, make sure to disconnect the mains cable (1) from the charger.
2. Ensure that you are in a well-ventilated place to avoid any potential hazards.
3. Take the red clamp (2) and connect it to the positive terminal of your car battery. The positive terminal is usually marked with a "+" sign or the letters "POS".
4. Take the black clamp (2) and connect it to the negative terminal of your car battery. The negative terminal is usually marked with a "-" sign or the letters "NEG" or "GND".
5. Once the clamps are securely connected to the battery terminals, you can plug in the mains cable (1) to a power outlet.
6. Refer to the instruction manual for specific charging settings and procedures based on your battery type and desired charging mode.
Please note that it is important to read the instruction manual thoroughly before using the charger to ensure safe and proper usage.
Add New Comment